Quick Answer: How Do I Fix My Computer Not Displaying?

What to do if computer turns on but screen is black?

8 Solutions – Your PC Turns On But No DisplayTest your monitor.Make sure your computer has completely restarted.Verify that the power supply voltage switch is set correctly.Perform a hard reset.Clear the BIOS memory.Reseat the memory modules.Understand LED lights.Check Hardware..

When I press the power button on my computer nothing happens?

If you’re still getting absolutely nothing when you press the power button, look to see if your motherboard has any idle indicator lights to confirm that the motherboard is definitely receiving power. If not, then you might need a new power supply. … Make sure it runs to the motherboard and is well connected.

What happens if your PSU doesn’t have enough power?

Unstable System. Random program crashes, system freezes and the Blue Screen of Death are all symptoms of a computer that’s not getting enough power. … Additionally, if the computer isn’t getting enough power the PSU may just give up and shut down the entire system.

Why is my laptop on but the screen is black?

One of the main causes for this issue is a corrupt system file preventing the operating system from loading, resulting in the black or blank screen. Restart Windows to see if it’s a temporary issue and resolves itself with a reboot. If the problem persists, erase your hard drive and reinstall Windows.

What do I do if my monitor isnt displaying?

Check the PowerUnplug the monitor from the wall.Unplug the cord from the back of the monitor.Wait one minute.Plug the monitor cord back into the Monitor and a known-good wall outlet.Press the Monitor power button.If this still does not work, try with known-good power cord.

How do I fix a black screen on startup Windows 10?

If your Windows 10 PC reboots to a black screen, just press Ctrl+Alt+Del on your keyboard. Windows 10’s normal Ctrl+Alt+Del screen will appear. Click the power button at the bottom-right corner of your screen and select “Restart” to restart your PC.

Can a bad PSU cause no display?

It could be the PSU, and if you are getting no display if your motherboard has no built in graphics card it could be the GPU, keep narrowing it down. Try the GPU in a different system if it supports it, or try a different PSU that has enough power. Usually no beep is bad.

What happens if PSU fails?

Most often what will happen is your PC will start randomly shutting down because your power supply is not putting out enough juice to run the system. Or your PC will fail to start at all.

Why did my monitor go black?

This can occur due to bad components, viruses or conflicting software; the exact problem can take a bit of trial and error to narrow down. Remove recently installed software or hardware. Run an up-to-date virus scan. Check the computer for symptoms of overheating: clogged/dusty vents, fan won’t turn.

Why is my PC on but no display?

Fix 1: Check if your monitor is turned on If your computer starts but displays nothing, you should check is if your monitor is working properly. Check the power light of your monitor to verify that it’s turned on. … If the problem still exists, you need to bring your monitor to the repair shop.

Why did my monitor stop working?

Try uninstalling (or reinstalling) your graphics drivers, and uninstall any new programs you have that may be causing a problem. Make sure your resolution and refresh rate are set properly (if you had them set too high, your monitor might not be able to display a screen).

How do I reset my monitor?

How to reset the LCD monitor to the default settings.On the front of the monitor, press the MENU button.In the MENU window, press the UP ARROW or DOWN ARROW buttons to select the RESET icon.Press the OK button.In the RESET window, press the UP ARROW or DOWN ARROW buttons to select either OK or ALL RESET.Press the OK button.Press the MENU button.

Why is my PSU not working?

Check that it has not been accidentally been switched off. Plug the PSU power cable into a wall socket or surge protector, and turn on the computer. … If it doesn’t light, try a different power cable and a different socket to eliminate those items as the source of the problem.

How do you fix a computer that turns on but no display?

How to Fix a Computer That Turns on but Displays NothingTest your monitor. … Verify that your PC has completely restarted and is powering up from a completely powered off state. … Troubleshoot the cause of the beep code if you’re lucky enough to get one. … Clear the CMOS. … Verify that the power supply voltage switch is set correctly. … Reseat everything possible inside your PC.More items…•